Special lifting frame of professional pipeline CCTV inspection
equipment robot
Basic requirements of UV CIPP CCTV inspection trenchless technology
The enclosure of the construction site shall be closed without a
gap, and the construction equipment and materials shall not be
placed outside the enclosure area.
The temporary parking area for engineering vehicles and the storage
area for testing equipment shall be set in the pipeline testing
operation area, and the spacing of each zone shall not be less than
1m. See attached Fig. 32 for the plane layout
The local repair work area shall be provided with a work vehicle
parking area, material stacking area, and tools and equipment
storage area. The safe distance between each partition and
enclosure shall not be less than 050m. See attached Fig. 3.3 for
the plane layout
The layout of the overall repair work area shall comply with the
following provisions a) work vehicle parking area, material
stacking area, tool, and equipment storage area, emergency material
stacking area, and waste material stacking area shall be set, and
the safe distance between each partition and enclosure shall not be
less than 0.5m; b) The layout of the operation area and the laying
down of facilities shall comply with the figure.
1 - construction signboard (nine signboards and one drawing); 2.
One-shot flashing lamp (for night construction); 3 - traffic
bucket; 4 - construction vehicles; 5-6-a warning light (for night
construction) in the blanking area of construction operation; 7 -
placement of construction equipment; 8 - pipe section to be
operated; 9 - emergency materials storage area; 10 - stacking area
of construction materials; 11 a traffic cone; 12. Auxiliary
vehicles for construction; 13 - temporary stacking area for
construction waste; 14 - safety fence
| Function: | Lifting CCTV camera |
| Temperature: | -10°C-55°C |
| Power | Motor |
